manual-motor-starters-Ex9SN

Manual Motor Starters Ex9SN

  • Available with enclosed coils for protection against particle contamination
  • Short-circuit protection
  • Disconnect function
  • Overload protection
  • Loss-phase protection
  • Suitable for three and single-phase application
  • Trip-free mechanism
  • Clear switch position indication ON/OFF/TRIP
  • Lockable handle

pdf icon smallContactors and Relays Catalogue (37.2 MB)

 

Categories: , ,

Product Description

selection-guide-motor-starters-Ex9SN

Specifications

Related Products

  • standard-reversing-Ex9CR-IEC-contactors

    IEC Contactors – Ex9CR 9 ~ 500 A Standard (Reversing)

    0 out of 5
    • Contactors according to IEC/EN 60947-4-1, IEC/EN 60947-4-1, UL 60947-1 and UL 60947-4-1
    • Four frame sizes with rated current up to 500 A at 690 V AC-3
    • Coil control voltage 24~600 Vac, 24~250 Vdc; 24~600 Vac/dc (115~300 A); 36~600 Vac/dc (400~500 A)
    • Wide range operating coil available for 115~500 A contactor
    • Mounts onto DIN rail 35 mm or 75 mm or onto panel (frame sizes 09~38 mount on 35 mm; 40~100 mount on 35 mm or 75 mm; 115~500 cannot be mount on DIN rail, only mount by screw)

    pdf icon smallContactors and Relays Catalogue (37.2 MB)

     

    Read more
  • mini-reversing-IEC-contactors-Ex9CSR

    IEC Contactors – Ex9CSR 6 ~ 12 A Mini (Reversing)

    0 out of 5
    • Contactors according to IEC/EN 60947-4-1, IEC/EN 60947-4-1, UL 60947-1 and UL 60947-4-1
    • Four frame sizes with rated current up to 500 A at 690 V AC-3
    • Coil control voltage 24~600 Vac, 24~250 Vdc; 24~600 Vac/dc (115~300 A); 36~600 Vac/dc (400~500 A)
    • Wide range operating coil available for 115~500 A contactor
    • Mounts onto DIN rail 35 mm or 75 mm or onto panel (frame sizes 09~38 mount on 35 mm; 40~100 mount on 35 mm or 75 mm; 115~500 cannot be mount on DIN rail, only mount by screw)

    pdf icon smallContactors and Relays Catalogue (37.2 MB)

     

    Read more
  • Ex9CDR IEC Contactors

    IEC Contactors Ex9CDR 9~95 A Standard (Reversing)

    0 out of 5
    • AC-3 contactor ratings from 630 A and AC-1 contactor ratings to 800 A
    • Coil voltages from 24~600 Vac, 50/60 Hz
    • Full Voltage Non-Reversing (FVNR) and Full Voltage Reversing (FVR)
    • 5 kA @ 600 Vac
    • Built-on NO or NC auxiliary contacts to 32 A
    • IP20 finger and back-of hand safe
    • 3 and 4 pole versions including 2NO+2NC and 4NO configurations
    • 95 A mounts on standard 35mm DIN rail (40~95 can also mount on 75 mm DIN rail)
    • Compatible with Ex9RD thermal overload relays
    • Plug-on accessories for reduced installation time
    • Coil replacement on standard contactor from 9~630 A

    pdf icon smallContactors and Relays Catalogue (37.2 MB)

     

    Read more